COLD ROLLING MILLS FOR C100 PURLIN
Profile:
Material: 1.0 mm Minimum Thickness, 2. 0mm Maximum Thickness
The 1.5 mm thickness raw material for inspection, in common use
Feeding width: Approx.210mm
Ex Cold Rolled Coil, Galvanized Coil, Yield strength: 550Mpa
Machine Components
5Ton*600mm manual un-coiler <for purlin only>
Un-powered; Load capacity= MAX.5Ton
Coil inner-diameter=470-510mm
Coil Width= MAX.600mm
Hydraulic Pre-shearing device
Hydraulic Pre-shearing device, manual control
Only for cutting the first piece and the end piece of the sheet
Pre-Leveling Device
The In-feed Section of the machine allows for variations in sheet width
Pre-Level Device with 4 over 3 shafts to remove the Coil-set
Hydraulic Punching device
Total two hydraulic cylinders
1st cylinder for punching 2*14*22 holes, one set of punching tools only
2nd cylinder for punching2*22*14 holes, one set of punching tools only
Cold Rolling Mills
The feeding section with guide
Gear/Sprocket driving, 14-step to form
Wall-plate-frame-design
Rollers manufactured from GCr15, CNC lathes, heat treatment, hard Chrome Coated
Shaft Diameter=Φ75mm, Precision Machined,
Main Motor=18.5KW
Max. Line speed of roll former approx. 15m/min
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside, slip type
Hydraulic Cutting device
Stop to Cutting, Post Cut, and no slug
Cutting tool material: Cr12MOV, Heat treatment
Pump motor =15KW
PLC Control System
Control the quantity &punching length& cutting length automatically
Combined with: PLC, Touch Screen(Siemens), Inverter (Schneider),
Encoder (Omron), etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V
Product rack Un-powered, 3 units
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine
with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Terms Of Trade
- Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
- Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.
Audited Supplier 
){kind=link}
){kind=link}