Material:0.8mm Minimum Thickness,1.2mm Maximum Thickness
1.0mm is for inspectin,common used
Galvanized,Yield Strength:345Mpa Machine Components
1.10 TON×1250 Hydraulic un-coiler with coil car(Traper wedge expand type)
Hydraulic system to expand coil inner hole,Pump motor:5.5kw
Taper wedge expand type
Double level expanding palms with two coils bore variations of 480mm-530mm for Palm 1 and 580mm-610mm for Palm 2
Load Capacity: Max. 10Tons;Coil Width Max. 1250mm
Retarding Motor to turn the coil,Motor:5.5KW
Maintain arm on the top, to avoid coil become loose when stop to be packed.
The arm to be driven by pneumatic cylinder,manual control
Automatic stopping device with limited switch as assistance to control stop/star rotation
With coil car - The original design
Up/Down stroke of Coil Car:Max. 450mm
Forward/backward troke of Coil Car:Max. 2000mm
2. Entry Roller Un-powered and Roll Forming M/C
Gear /Sproket driving ,24-step to form
Rollers manufactured from 45# steel,CNC lathes,heat treatment, hard Chrome Coated
Diameter of shaft=ф95mm; Precisin Machined
Main motor=15kw × 2,Frequency speed control
Forming speed: Approx. 15m/min
protetion Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside
3.Hydraulic Cutting Device
Stop to cut,post cut,Slug Breaker
Pump motor =5.5KW
Cutting tool material: Cr12,Heat treatment
4.PLC Control System
Comined with:PLC,Touch Screen (SIEMENS),Inverter(Schneider), Encoder(Omron),etc
Cut-to-length tolerance≤±2mm
Control voltage 24v
Product Rack Un-powered,3 units