Solar Structure Frame Support Bracket Roll Forming Machine

• After-sales Service: 1 Year Warranty
• Warranty: 1 Year
• Certification: CE, ISO9001
• Model NO.: Solar Structure Bracket Roll Forming Machine
• Customized: Customized
• Condition: New
• Control Type: PLC Control System
• Automatic Grade: Automatic
• Size: C100-C300,Z120-Z300
• Thickness: 1.0mm-3.0mm
• Transport Package: 40hq*1+20gp*1
• Specification: 18T
• Trademark: Xiamen Liming
• Origin: Fujian, China (Mainland)
• Production Capacity: 600
• Package Size: 11840.00cm * 1500.00cm * 1130.00cm
• Package Gross Weight: 100000.000kg
• Lead Time: 120 days (1 - 1 Sets) ; To be negotiated ( > 1 Sets)

Product Description

 Solar Structure Frame Support Bracket Roll Forming Machine

Material:Thicnkness:1.0-2.5mm, 2.0mm for inspection
                                     Feeding  width:approx.134mm
                                     Hot Rolled Coil, Yield strength: 235 mpa
Machine Flow:
Unciler--Leveler--Servo Feeder-- Punch--Roll Former-- Cut to length -- Receiving Table

Machine Components

Pre-Levelling Device

The In-feed Section of the machine allows for variations in the sheet width
Pre-Level Device with 4 over 3 shafts to remove the Coil-set

Pre-shearing & Pre-punching device

Feeding rollers with guide section
Two steps of Powered feeding rollers,driven by Servo Motor
Hydraulic pre-shear ,only for cut off the head of first piece and tail of end piece
Punching cylinder for pubching holes on the bottom
Step-length:500mm*12=600mm
Pump motorof hydraulic group:30kw
Oil cooling system(air conditioner) for hydraulic group

Cold Rolling Mills
The feeding section with guide;Gear/Sprocket driving,
Rollers manufactured from Cr12,heat treatment,CNC lathes
Shaft Diameter=φ75 mm,Precision Machined
Main Motor=30kw,Frequency speed control
Liner speed:approx 7m/min includes punching holes and cutting6 meters long profiled sheet
Full mesh cover above the roll formrer to avoid hands go inside


Hydraulic Flying Cuuting device
Non-Stop-to-Cut,Slug breaker
Total two sets of cutting blades
Cutting tool material:Cr12MOV,Heat treatment
The cutting carriage to move together with the sheet and then cut-off the same time.The forming speed would be decreased when holding the sheet and then cut-off.After cut off,then pin would come out and then another pneumatic cylinder to pull back the cutting carriage.
The forming speed would be decreased when holding the sheet and and then cut-off at the same time.