Yx25-200-600 Roofing Sheet Glazed Tile and Sheet Roll Forming Making Machine

• Warranty: 1 Year
• Certification: CE, ISO9001
• Customized: Customized
• Condition: New
• Control Type: PLC Control System
• Automatic Grade: Automatic
• Model NO.: Yx25-200-600
• Feeding Width: 750 mm
• Effective Width: 600 mm
• Thickness: 0.18 mm
• Yield Strength: 350 MPa
• Transport Package: 40gp*1
• Specification: 12T
• Trademark: Xiamen Liming
• Origin: Fujian, China(Mainland)
• Production Capacity: 100 Set/Month

Product Description

This Producing Process Sketch As Below Picture:





This Profile Drawing As Below Picture:








 

General Parameter

1	Item	Parameters
2	Model NO.	YX25-200-600
3	Material	galvanized sheet
4	Thickness	0.18 mm
5	Yield Strength	350 MPa
6	Feed Width	750 mm
7	Effective width	600 mm
8	Roll Stages	18 Stages
9	Shafts Diameter	ф75/95 mm
10	Main Motor Power	15 KW
11	Hydraulic Group Power	7.5 KW
12	Max. Line Speed Of Roll Former	Approx.40 m/min
13	Electric Standard	According to local voltage

Machine Components
 

A.  5Ton*1250mm Hydraulic un-coiler  
      Hydraulic system expand coil inner hole, Pump motor: 3KW
       Frequency Inverter to regulate turning speed, Motor: 11KW
       To fit the Max. Line speed of roll former: 40mpm
       Taper wedge expand type instead of Link-connect expanding system
       Load capacity = Max.5Tons
       Coil Inner-diameter=510±30 mm, Coil width = Max.1250mm
       Automatic stopping device with limited switch as assistance to control stop/star rotation






B.   Entry bench and Manual pre-shearing device
       Entry bench and manual pre-shearing device
       Working thickness: up to 0.6mm
       Smart cut control, to cut off the end of the final piece of sheet only





 C.  Lubrication Device
       Lubricate steel strip surface before strip feed into roll forming station.
       Full of oil-felt disc cover on the upper and lower shafts
       1 set of lubricating rollers
       Oil supplied by manual


D.  Cold Rolling Mills
       Feeding section with guide;
       Gear/Sprocket driving;18 stages to form
       New-stand-frame-design
      Rollers manufactured from 45# steel, hard chrome coating 
       NTN ball bearing at both ends of shaft in each forming stage
      Shafts Diameter=ф75/95mm, Precision Machined
      Main motor =15KW,Frequency speed control
      Max line speed of roll former: Approx.40m/min






 E.  Hydraulic Cutting Device
       Stop to cut, Post cut, No Blanking cut
       Cutting tool material : Cr12Mov, Heat treatment;
       Hydraulic tank,Pump motor =7.5KW



       




 F.  PLC Control System
       Control the quantity & cutting length automatically;
       Combined with: PLC, Touch Screen (Siemens), Inverter (Schneider), Encoder (Omron), etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V




G.  Product Rack    Un-powered, 3 units

 

 

After-Sale Service

In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
 

Terms Of Trade

1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.