R80 Cold Rolling Mills for Ridge Cap with Ribs

• Tile Type: Glazed Steel
• Certification: CE, ISO
• Condition: New
• Customized: Customized
• Usage: Roof
• Transmission Method: Motor Drive
• Model NO.: R80
• Feeding Width: 1250 mm
• Effective Width: 1044 mm
• Thickness: 0.4-0.6mm
• Yield Strength: 245 MPa
• Transport Package: 40gp*1
• Specification: 12T
• Trademark: Xiamen Liming
• Origin: Fujian, China(Mainland)
• Production Capacity: 100 Set/Month

Product Description

R80 COLD ROLLING MILLS FOR RIDGE CAP WITH RIBS

This Profile Drawing As Below Picture:


Material:      0.30mm Minimum Thickness, 0.4mm Maximum Thickness
The raw material 0.32mm sheet for inspection, in common use
Feeding width: 405mm
Pre-paint Coil;
Yield Strength: 250Mpa
 

General Parameter
 

1	Item	Parameters
2	Model NO.	YX8-116-1160
3	Material	Pre-painted galvanized sheet
4	Thickness	0.3-0.4 mm
5	Yield Strength	250 MPa
6	Feed Width	1250 mm
7	Effective width
8	Roll Stages	18 Stages
9	Shafts Diameter	75 mm
10	Main Motor Power
11	Hydraulic Group Power	11kw
12	Max. Line Speed Of Roll Former	3-4m/min
13	Electric Standard

 

 

Machine Components

A.  3TonX600mm Hydraulic Un-Coiler (powered drive)
Hydraulic system for expansion coil-inner-hole with 4 palms
Link-connect expanding system
Pump power=1.5KW
Frequency Inverter to regulate turning speed: Motor: 2.2KW
Load capacity=3 Ton;Coil Inner diameter =451-530 mm
Coil outer-diameter=Max. 1500 mm
Coiler Width=Max. 600 mm
Driving motor to turn the coil
Automatic stopping device with limited switch as assistance to control stop/star rotation


B.Manual Pre-shearing device (Un-powered)
Smart cut control, to cut off the end of the final piece of sheet only
Work thickness up to 0.8mm




C. Polythene Film-On Device
Un-powered, with un-coil-rollers at double sides
With rubber shaft to film-on the film


D.Cold Rolling Mills
Feeding section with guide;
Gear/Sprocket driving; 18 stages to form;
New frame design
Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75mm, Precision Machined
Main motor =7.5 KW, Frequency speed control
Forming speed: Approx. 3-4m/min
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside


 

E. Hydraulic Pressing/Cutting Device
Stop to press, Stop to cut,Post cut, No Blanking cut
Cutting tool material: Cr12Mov, Heat treatment;
Hydraulic unit, Pump motor =11KW




F. PLC Control System
Control the quantity, drawing length & cutting length automatically.
Combined with: PLC, Touch Screen  (Siemens), Inverter (SCHNEIDER), Encoder (Omron), etc
Cut-to-length tolerance≤±2.0 mm
Control voltage 24V

Product Rack   Un-powered, 3 units

 

 

After-Sale Service

In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
 

Terms Of Trade

1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.