This Producing Process Sketch As Below Picture:
This Profile Drawing As Below Picture:
General Parameter
| 1 |
Item |
Parameters |
| 2 |
Model NO. |
YX52-234-936 |
| 3 |
Material |
Pre-painted galvanized sheet |
| 4 |
Thickness |
0.8-1.6 mm |
| 5 |
Yield Strength |
240-550 MPa |
| 6 |
Feed Width |
1220mm |
| 7 |
Effective width |
936 mm |
| 8 |
Roll Stages |
18.5 Stages |
| 9 |
Shafts Diameter |
∅95 mm |
| 10 |
Main Motor Power |
11 KW |
| 11 |
Hydraulic Group Power |
7.5KW |
| 12 |
Max. Line speed of roll former |
Approx. 15 m/min |
| 13 |
Electric Standard |
According to local voltage |
Machine Components
A. 10Ton*1300mm Hydraulic un-coiler with coil car
Hydraulic system to expand coil inner hole, Pump motor: 5.5KW
Taper wedge expand type
Double level expanding palms with two coil bore variations of 480-530 for Palm 1 and 580-630 for Palm 2
Load Capacity: Max. 10 Tons; Coil Width Max. 1300mm
Coil Outer-diameter Max. 1500mm
Retarding Motor to turn the coil, Motor: 11KW
One support arm installed at the end of un-coiler mandrel
With coil car - The original design
Up/Down stroke of Coil Car: Max. 450mm;
Forward/backward stroke of Coil Car: Max. 2000mm
B. Feeding section with guide; Wall-plate-frame Design
Gear/Sprocket driving;30-step to form;including embossing steps.
Rollers manufactured from 40Cr, CNC lathes, hard Chrome Coated
Diameter of shaft=ф95mm;Main motor =18.5KWX2
Frequency speed control;Max line speed for roll former:15m/min;
Protection mesh cover above the roll form to avoid the hands going it
The following picture is for reference only
C. Hydraulic Cutting M/C
Stop to cut, Post cut, Slug Breaker;
Pump motor =7.5KW
Cutting tool material: Cr12, Heat treatment
One extra cutting blade as spare
D. PLC Control System
Control the quantity & cutting length automatically.
Control the switch action to run the different two profiles
Combined with: PLC, Touch Screen (Siemens), Inverter (Schneider),
Encoder (Omron), etc
Cut-to-length tolerance≤±2 mm
Control voltage 24V
E. Product Rack Un-powered, 3 units
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Terms Of Trade
1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.
){kind=link}