This Producing Process Sketch As Below Picture:
This Profile Drawing As Below Picture:
Material: 0.18mm Minimum Thickness, 0.30mm Maximum Thickness
The 0.2 mm thickness raw material for inspection, in common use
Effective width: 740±10mm
Feeding width: 890/895/900mm
Galvanized steel, Yield strength: 550-600Mpa
Notes: The buyer should provide testing material for testing machine.
General Parameter
| 1 |
Item |
Parameters |
| 2 |
Model NO. |
YX19-74-740 |
| 3 |
Material |
Galvanized steel |
| 4 |
Thickness |
0.18--0.30MM |
| 5 |
Yield Strength |
550-600Mpa |
| 6 |
Feed Width |
890/895/900mm |
| 7 |
Effective width |
740±10mm |
| 8 |
Roll Stages |
24stages |
| 9 |
Shafts Diameter |
ф75/95mm |
| 10 |
Main Motor Power |
11kw |
| 11 |
Hydraulic Group Power |
5.5kw |
| 12 |
13Max Line speed of roll Former |
Approx. 15m/min |
| 13 |
Electric Standard |
According to local voltage |
Machine Components
A. 10Ton*1250mm Hydraulic un-coiler with coil car
Hydraulic system to expand coil inner hole, Pump motor: 5.5KW
Taper wedge expand type
Double level expanding palms with two coil bore variations of 480-530 and 580-630
Load Capacity: Max. 10 Tons; Coil Width Max. 1250mm
Coil Outer-diameter Max. 1500mm
Retarding Motor to turn the coil, Motor: 5.5KW
Slippage guiding equipped on the base frame. There is a hydraulic oil cylinder on
the base to drive the un-coiler to make correction when the shaft-line is off-position
with the forming machine, to make sure the generatrix of the coil consistent with the forming machine.
Maintain arm on the top, to avoid coil become loose when stop to be packed.
The arm to be driven by pneumatic cylinder, manual control
The air supplier should be provide by the user
B.With coil car
Up/Down stroke of Coil Car: Max. 350mm
Forward/backward stroke of Coil Car: Max. 2000mm
C.Entry roller & Manual Pre-shearing device
Un-powered
Smart cut control, to cut off the end of the final piece of sheet only
Working thickness up to 0.5mm
D.Cold Rolling Mills
Feeding section with guide;
Gear/Sprocket driving;24-step to form;
Working height: 900mm
New stand frame design
Rollers manufactured from 45#, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75/95mm; Precision Machined
Main motor =11KW, Frequency speed control
Max. line speed of roll former: 15m/min
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid
Hands Go Inside
The picture below is only for your reference:
E.Hydraulic Cutting Device
Stop to cut, Post cut, No Blanking cut
Cutting tool material : Cr12, Heat treatment;
Pump motor =5.5KW;
F.PLC Control System
Control the quantity & cutting length automatically;
Combined with: PLC, Touch Screen (Siemens), Inverter (Schneider),
Encoder (Omron), etc
Cut-to-length tolerance≤±2 mm
Control voltage 24V
Product Rack Un-powered, 3 units
SHIPPING CONTAINER: 40GP'X1+20GP'X1
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Terms Of Trade
1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.
Audited Supplier 
){kind=link}
){kind=link}