This Producing Process Sketch As Below Picture:
This Profile Drawing As Below Picture:
General Parameter
| 1 |
Item |
Parameters |
| 2 |
Model NO. |
YX19-74-740 |
| 3 |
Material |
Pre-painted galvanized sheet |
| 4 |
Thickness |
0.18-0.3 mm |
| 5 |
Yield Strength |
550-600 MPa |
| 6 |
Feed Width |
890/895/900 mm |
| 7 |
Effective width |
740 mm |
| 8 |
Roll Stages |
24 Stages |
| 9 |
Shafts Diameter |
ф75 /95 mm |
| 10 |
Main Motor Power |
30 KW |
| 11 |
Hydraulic Group Power |
5.5 KW |
| 12 |
Max. Line Speed Of Roll Former |
Approx.40m/min |
| 13 |
Electric Standard |
According to local voltage |
Machine Components
A. 10Ton*1250mm Hydraulic un-coiler with coil car
Hydraulic system to expand coil inner hole, Pump motor: 5.5KW
Taper wedge expand type
Double level expanding palms with two coil bore variations of 480-530 and 580-630
Load Capacity: Max. 10 Tons; Coil Width Max. 1250mm
Coil Outer-diameter Max. 1500mm
Retarding Motor to turn the coil, Motor: 7.5KW
Maintain arm on the top, to avoid coil become loose when stop to be packed.
The arm to be driven by pneumatic cylinder, manual control
The air supplier should be provide by the user
With coil car
Up/Down stroke of Coil Car: Max. 350mm
Forward/backward stroke of Coil Car: Max. 2000mm
B. Entry bench and Manual pre-shearing device Un-powered
Working thickness: up to 0.5mm
Smart cut control, to cut off the end of the final piece of sheet only
C. Cold Rolling Mills
Feeding section with guide;
Gear/Sprocket driving;24 stages to form
Wall-plate frame design
Rollers manufactured from 45# steel,CNC lathes,hard chrome coating
Shafts Diameter=ф75/95mm, Precision Machined
Main motor =30KW,Frequency speed control
Max line speed of roll former: Approx.40m/min
Due to thin and hard material. Don't produce at max. Line speed.
Production speed: 20-29M/min
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid
Hands Go Inside
The picture below is only for your reference:
D. Hydraulic Cutting Device
Stop to cut, Post cut, No Blanking cut
Pump motor =5.5KW
Cutting tool material : Cr12, Heat treatment;
The following picture is for your reference only
E. PLC Control System
Control the quantity & cutting length automatically;
Combined with: PLC, Touch Screen, Inverter (SIEMENS), Encoder (Omron), REMOTE CONTROL etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V
F. 6 METERS PNEUMATIC STACKING PALLET
Stacking Length Max. 6 meters, Min. 1 meter
Pile up the sheet after cutting automatic.
Equipped with a bottom pallet to be pull out by motor driven
Support arm action in vertical direction, driven by pneumatic system
Action controlled by Pneumatic system.
The air supply provided by the user
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Terms Of Trade
1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.
Audited Supplier 
){kind=link}
){kind=link}