This Producing Process Sketch As Below Picture:
This Profile Drawing As Below Picture:
General Parameter
| 1 |
Item |
Parameters |
| 2 |
Model NO. |
YX20-222.8-1114 |
| 3 |
Material |
Pre-painted galvanized sheet |
| 4 |
Thickness |
0.4-0.6 mm |
| 5 |
Yield Strength |
245 MPa |
| 6 |
Feed Width |
1219 mm |
| 7 |
Effective width |
1114 mm |
| 8 |
Roll Stages |
16 Stages |
| 9 |
Shafts Diameter |
∅75 mm |
| 10 |
Main Motor Power |
11 KW |
| 11 |
Hydraulic Group Power |
11 KW |
| 12 |
Electric Standard |
According to local voltage |
Machine Components
A. 5Ton*1250mm Hydraulic un-coiler with coil car
Hydraulic system expand coil inner hole, Pump motor: 3KW
Frequency Inverter to regulate turning speed, Motor: 3KW
Link-connect expanding system
Load capacity = Max.5Tons
Coil Inner-diameter= 510±30 mm; Coil width = Max.1250mm
Automatic stopping device with limited switch as assistance to control stop/start rotation
5 Tons coil car - The NEW design
Up/Down stroke of Coil Car: Max. 350mm;
Forward/backward stroke of Coil Car: Max. 2000mm
B. Entry roller & Manual Pre-shearing device Un-powered
Smart cut control, to cut off the end of the final piece of sheet only
Working thickness up to 0.6mm
C. Polythene Film-on Device
Un-powered, with un-coil-rollers at double sides
With rubber shaft to film-on the film
D. Cold Rolling Mills
Feeding section with guide
Gear/Sprocket driving;16-step to form;
New stand frame design
Rollers manufactured from 45#, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75mm, Precision Machined
Forming Speed: Approx. 5m/min (on the base of stair distance 350mm and product length 6 meters)
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside
E. Hydraulic Stair-Drawing & Cutting M/C
Stop to press, Stop to cut; Post cut, blanking cut
Cutting tool material: Cr12, Heat treatment
Stair depth=15mm
4- pillars structure instead of old frame design
Pump motor =11 KW, with accumulator to increase the speed
F. PLC Control System
Control the quantity & cutting length automatically;
Combined with: PLC, Touch Screen, Inverter (SIEMENS), Encoder (Omron), REMOTE CONTROL etc
Cut-to-length tolerance≤±0.5 mm
Control Voltage 24V
G. Product Rack Un-powered, 2 units (3 meters long per unit)
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Terms Of Trade
1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.
){kind=link}