This Profile Drawing As Below Picture:
Material: Material Thickness: 0.35~0.6mm
Effective width: 1000+6mm
Feeding width: 1220mm
Pre-paint Coil, Galvanized steel; Yield strength: 550Mpa
General Parameter
| 1 |
Item |
Parameters |
| 2 |
Model NO. |
YX29-200-1000 |
| 3 |
Material |
Galvanized steel |
| 4 |
Thickness |
0.35--0.6mm |
| 5 |
Yield Strength |
550Mpa |
| 6 |
Feed Width |
1220 mm |
| 7 |
Effective width |
1000+6mm |
| 8 |
Roll Stages |
------ |
| 9 |
Shafts Diameter |
------ |
| 10 |
Main Motor Power |
------ |
| 11 |
Hydraulic Group Power |
5.5KW |
| 12 |
Max. Line Speed Of Roll Former |
------ |
| 13 |
Electric Standard |
According to local voltage |
Machine Components
Auto feeding, equipped with Encoder
Frequency speed control
Adopt "servo motor + reducer" instead of "Normal motor + frequency transducer"
Control the spacing of tooth crimp automatically
Combined with: PLC, Touch Screen (SIEMENS), Inverter (Schneider),
Encoder (Omron), etc
Hydraulic system to act pressing
Hydraulic Station Power: 5.5KW
The min. distance from the last crimp to the end of the sheet is 350mm (standard design)
Curved Radius: Min 350mm
Total,
1 set of feeding rollers, 1 set of convex curving tools and 1 set of concave curving tools for profile
YX29-200-1000
1 set of feeding rollers, 1 set of convex curving tools for profile YX29.5-285.5-1142
Mould Cassette design for future quick exchanging for two roof profiles
This machine can work in two directions, horizontal or vertical
The curving machine and samples below for you reference.
Convex crimping:
Concave crimping:
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Terms Of Trade
1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.
Audited Supplier 
){kind=link}
){kind=link}