This Producing Process Sketch As Below Picture:
This Profile Drawing As Below Picture:
General Parameter
| 1 |
Item |
Parameters |
| 2 |
Model NO. |
YX30-200-1000/1200 |
| 3 |
Material |
Pre-painted galvanized sheet |
| 4 |
Thickness |
0.3-0.8 mm |
| 5 |
Yield Strength |
550 MPa |
| 6 |
Feed Width |
1220/1445 mm |
| 7 |
Effective width |
1000/1200 mm |
| 8 |
Roll Stages |
26 Stages |
| 9 |
Shafts Diameter |
ф95 mm |
| 10 |
Main Motor Power |
15 KW |
| 11 |
Hydraulic Group Power |
11KW |
| 12 |
Max. Line Speed Of Roll Former |
Approx.18-20 m/min |
| 13 |
Electric Standard |
According to local voltage |
Machine Components
A. (5+1 )Ton X 1500mm Hydraulic Un-coiler (with support arm)
Hydraulic system expand coil inner hole, Pump motor: 3KW
Frequency Inverter to regulate turning speed, Motor: 3KW
Link-connect expanding system
Hydraulic Pressure keeping function
Load capacity = Max.6Tons
Coil Inner-diameter= 470-650mm, Coil width = Max.1500mm
Automatic stopping device with limited switch as assistance to control stop/star rotation
B. Entry bench and Manual Pre-shearing device
Entry bench and Manual Pre-shearing device
Working thickness: up to 0.8mm
Smart cut control, to cut off the end of the final piece of sheet only
C. Polythene Film-on Device
Un-powered film-on device to cover plastic film on the surface of sheet
D. Cold Rolling Mills
Feeding section with guide;
Gear/Sprocket driving;26 stages to form
Wall-plate-frame design
Rollers manufactured from 45# steel,CNC lathes,hard chrome coating
Shafts Diameter=ф95mm, Precision Machined
Main motor =15KW,Frequency speed control
Max line speed of roll former: Approx.18-20m/min
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside
E. Hydraulic Stair-Drawing & Cutting M/C
Stop to press, Stop to cut; Post cut, No Blanking cut
Dropping cutting device
Cutting tool material: Cr12, Heat treatment
Stair depth=18mm
Profiles can be with stairs and without stairs, without stairs is blank profile
Pump motor =11KW with Accumulator
4- pillars structure instead of old frame design
F. PLC Control System
Control the quantity & cutting length automatically;
Combined with: PLC, Touch Screen, Inverter (SIEMENS), Encoder (Omron), REMOTE CONTROL etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V
G. Product Rack Un-powered, 3 units
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Terms Of Trade
1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.
){kind=link}