General Parameter
| 1 |
Item |
Parameters |
| 2 |
Model NO. |
YX15-225-900 |
| 3 |
Material |
Pre-painted galvanized sheet |
| 4 |
Thickness |
0.4-0.8 mm |
| 5 |
Yield Strength |
235 MPa |
| 6 |
Feed Width |
1000 mm |
| 7 |
Effective width |
900 mm |
| 8 |
Roll Stages |
12 Stages |
| 9 |
Shafts Diameter |
ф75mm |
| 10 |
Main Motor Power |
5.5 KW |
| 11 |
Hydraulic Group Power |
3 KW |
| 12 |
Max. Line Speed Of Roll Former |
Approx.15 m/min |
| 13 |
Electric Standard |
According to local voltage |
Machine Component
A. 5Ton*1250mm Un-coil Rack
No power; Coil inner-diameter=500mm
Load capacity= MAX.5.0Ton, Coiler Width= =1250mm
B. Entry Roller One Set(Feeding Section With Guide)
C. Cold Rolling Mills
Feeding section with guide
Gear/Sprocket driving; 12 -step to form
Rollers manufactured from 45#, CNC lathes,Heat Treatment hard Chrome Coated
Shafts Diameter=ф75mm, Precision Machined
Main motor =5.5 KW, Frequency speed control
Max Line speed of roll Former: Approx.15m/min
Protection Mesh Cover (full mesh type) Above Roll-former To Avoid Hands Go Inside
D. Hydraulic Cutting Device
Stop to cut, Post cut, No Blanking cut
Cutting tool material : Cr12, Heat treatment;
Pump motor =3KW
E. PLC Control System
Control the quantity & cutting length automatically;
Combined with: PLC, Touch Screen (Siemens), Inverter (Schneider), Encoder (Omron), etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V
F. Product Rack Un-powered, 3 units
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
Terms Of Trade
1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.
){kind=link}